|
Legacy Sheer Curtain Panel is available in 3 colors. This crinkle sheer curtain panel is adorned with a curling vine design running vertically down the panel. Reminiscent of classic heirloom pieces these sheer curtain panels will make any window treatment an intstant classic.
Sold as a single panel.
To order a fabric sample swatch - see related products section below.
See below for complete information about options for your curtain panel.
|
Biege on Natural
|
Natural
|
White
|
Curtain Panel Options
Choose your Size:
Sizes Available: (width is for single curtain panel)
55'' width x 84'' height
55" width x 96" height
55" width x 108" height
55" width x 120" height
Measuring Instructions:
For proper fullness, curtain panels should measure two times the width of the area you are covering. For length, measure from the top of the curtain rod to where you would like the curtains to end. For example, 1" above the floor, slightly touching the floor or puddling on the floor.
Choosing your Header Style:
Rod Pocket (Standard):
Curtain panels are sewn with a standard 3 inch rod pocket top. This option allows you to shirr onto a conventional curtain rod or use ring clips to attach to top of curtain panel. Please see example images below.
Standard 3 inch rod pocket |
Standard 3 inch rod pocket
using ring clips |
Grommet Top |
Back-tabs with Rod pocket |
How to choose your grommet ring color:
Coordinate as much as possible with your other curtain hardware. |
Back-tabs provide a faux-pleated look for a more tailored design. 3 inch rod pocket also included to shirr onto curtain rod. |
Grommet Header Style:
As an alternate header style, you can upgrade to the grommet top for your curtains. Grommets are metal rings that are sewn into the same area where a rod pocket would be placed. You slide the grommet rings over the curtain rod and the fabric is pushed forward, creating a modern, sleek and tailored look for your curtains.
Grommet Options:
Color Selection:
Antique Gold, Dark Chocolate Brown and Gun Metal Gray
Size: 1 5/8 inches (designed for curtain rods up to 1 3/8" diameter)
Back-tabs with Rod Pocket (2 in 1 option) Header Style:
This upgrade gives you two options to choose from when installing your curtains. Back-tabs are tabs sewn every few inches along the back side of the rod pocket where they cannot be seen. You slide the curtain rod through these tabs. This pushes the fabric slightly forward in-between each tab, creating a tailored, faux-pleated look for your curtains. The traditional rod pocket is also sewn into the top of your panel so you are able to have the alternative installation of the curtain panel shirred directly onto the rod for a more gathered, extra-full appearance.
Additional Information:
4" bottom hem, 1" double folded side hems
Most panels are sewn in the USA at the time of order.
Care Instructions:
100% Polyester (Faux Silk)
Dry Clean Recommended.
Scarf curtain swag available as a window topper in the following size only:
55'' W x 216'' H (6 yards). See related products below.
Fabric tie-backs NOT included.
(Please see our wood or metal tie-backs in our curtain rod hardware section.)
Shipping Timeline: As most panels are created at the time of order, curtains usually ship within a 14-16 business day timeframe. We will do our very Best to communicate any type of delays to your order. Please take advantage of our sample fabric swatch ordering program to color coordinate the fabrics for your home, as computer monitors widely vary on color display. Ordering swatch samples will also help prevent further delays with exchanges, due to color. While these curtains are not considered a custom order and may be returned, a return authorization code is required, please request via phone or email for a speedy response.
For expedited shipping, please contact us for stock availability at customerservice@bestwindowtreatments.com. Even for rush orders, at least 5 business days is needed for production.
View our window treatment information and customer service policy. |
