Custom Corner Window 1" Iron Curtain Rod featuring Fleur Finials

Black

Oil Rubbed Bronze

Pewter

Rustica (dark brown)

Corner Windows are defined as having 2 sides with a single angle. Classic 1” wrought iron curtain rods forged from authentic materials and hand finished using low V.O.C. water based paints and gel stains. Every rod is made to order and cut to your exact specifications.

Corner Window Iron Curtain Rod Sets include two finials, corner window connectors, forged brackets & mounting hardware.  Easy installation with installation template included.  These rods are perfect, if you need to go up to 72 inches without a center support bracket. Rods over 72 inches will include a center support bracket, as this rod must have a support every 6 feet or 72 inches.

Custom Corner Window Iron Curtain Rod Set includes the following:

Two wrought iron poles - custom cut to your exact size.
Corner Rod Connectors
Two Finials - (decorative end pieces)
Fleur Finial Measurements: 4-1/2" W x 3" H

All required brackets according to size of the pole at no extra charge.

Estate Metal Finishes: All Hardware (rods, finials & brackets) are finished in the same color
Click here to view coordinating Rings or C-Rings

Due to New Fedex Shipping Guidelines Rod Sections over 94” will come as two pieces. The splice will be at the center of the section to be concealed and supported by the center bracket.

Meauring for Corner Window Curtain Rod

To order a Corner window rod set correctly, you need to provide the separate measurement of each section of wall(shown here as A, B)

Please note that finial measurments are not included. Please check installation area to ensure proper space for the finials.

**PLEASE NOTE: Rods are measured in inches - please use dropdown above to select inches needed and pricing will adjust according to size. When measuring for your curtain rod, be sure to go at least  3-5 inches past your window trim on each side for this large diameter rod, depending on how far you would like your curtains to stack off of the window.

Bracket Information:

Forged Single Bracket 1" w x 3 1/2" h x 3 1/4" d (2 1/2 projection)	Forged Extension Bracket 1" w x 3 1/2" h x 6" d (5"projection)	Forged Double Bracket 1" w x 2 1/2" h x 5 3/4" d (2 1/2" & 5" projection)
Center By-Pass Bracket 4" w x 1" h x 3 1/8" d (2 1/2 projection)	Center Extended By-pass Bracket 4" w x 1" h x 5-3/4" d (5"projection)	Center Double Bypass Bracket 4" w x 1" h x 5-3/4" d (2 1/2" & 5"projection)
Fixed Ceiling Bracket	Adjustable Ceiling Bracket

Each section comes with the following number of brackets based on width. Additional brackets can be ordered for an additional charge.
Section Widths to:               # Brackets:
48”-72"                               2
73”-144"                             3
145”-188"                           5
189”-260"                           7

Coordinating Accessories Available:

1-1/2" Inside Diameter Rings with Eyelets
1-1/2" Inside Diameter By-pass C-Rings with Eyelets
Assorted Iron Tie-backs (see related products section below)

Custom, made-to-order wrought iron forged from authentic materials and hand finished rod set ships in 2-3 weeks. 

**PLEASE NOTE: Rods are measured in inches - please use dropdown above to select inches needed and pricing will adjust according to size. To the 1/8 of an inch is only necessary if you are working in tight spaces.  If you do not have any obstructions or space restrictions, you can order in whole inches.  When measuring for your curtain rod, the standard is to go 3-5 inches past your window trim on each side for this large diameter rod, depending on how far you would like your curtains to stack off of the window.

Measuring Terms:

Order "S" - the standard rod width when placing your order.
Keep in mind "TT"  (tip to tip) width - will be your final width, with finials.
The standard rod width is needed to accomodate your curtain panels.
The tip to tip width is needed to make sure your finials are not running into other objects, such as walls, other windows, doors, artwork, etc.  So, make sure to measure for the tip to tip width, for your own personal reference (we need the rod width only.)

Finial Specifications:  (be sure to check installation space to ensure you have sufficient room for this final "tip to tip" width"). 

Eco Friendly Information about 1 Estate Iron Curtain Rod Sets<

• Window coverings products for an earth friendly home.
  
• Posting all our sales and marketing materials digitally on our website and being frugal in sending out printed information.
  
• Eliminating the use of plastics in our packaging, instead using papers and cardboard high in post consumer recycled content.
  
• Using low V.O.C. water based paints and gel stains in our finishing.
• Making our products from natural materials such as recycled metal, glass, ceramics and plantation grown wood.
• Minimal use of plastics and resins.

Please call us with any questions or for an even quicker response we are also available by email at customerservice@ bestwindowtreatments.com.

View our window treatment information and customer service policy.