Grommet Custom Drapery Panel Group 1 Fabrics ($)

Measuring Suggestions:

Outside Mount - Outside mounted treatments will be made to the exact dimensions provided.

Width: Measure the exact width of the window, including any frame. Add a minimum of 4” to each side (8” total overlap) to ensure light control and privacy.

Height: Measure the height of the window from the top edge of the molding to the bottom edge of the molding, sill or floor. Add a minimum of 4” to allow for an adequate mounting area above the window.

Inside Mount - Provide the exact sizes of the opening. The workroom will make all necessary deductions for a perfect fit.

Width: Measure inside the window casing at the top, middle and bottom. Record the narrowest measurement. No deduction will be taken on width.

Height: Measure inside the window casing at the left, center and right. Record the shortest measurement. B&W’s workroom will take a 3/4” deduction on the height.

Grommet Options: Black, Nickel, Matte, Satin Smoke, Brass, Antique Brass, Antique Copper, Oil Rubbed Bronze, Brushed Steel

Small Round Grommets:  Inside Diameter =  1-9/16"  /  Outside Diameter = 2-3/8" [small round grommets will accommodate poles up to a maximum of 1-3/8"]

Large Round Grommets:  Inside Diameter =  2-1/2"   /  Outside Diameter =  3-3/4"

Square Grommets:  Inside Diameter = 1-9/16"  /  Outside Diameter = 2-5/8" [square grommets will accommodate poles up to a maximum of 1-3/8"]

Care and Maintenance

It is recommended that Draperies & Side Panels be vacuumed periodically with a brush or drapery hose attachment. Professional cleaning is recommended for all Custom Drapery Panels. A professional drapery cleaner may be found in the yellow pages or on the internet.