Rod Pocket Custom Drapery Panel in Group 3 Fabrics $$$ - Single Width Size

Custom Rod Pocket Curtains - Single Width-You Choose the Length
HS Group 3 Fabrics

Group 3 Custom Fabric Swatches - Click here to view all Group 3 HS Custom Swatches

Decorative Trim - Click here to view all available decorative trim options

Custom Window Treatment Information:

Production Time: 10 - 12 business days
Delivery Time via UPS: 3-5 Standard Days, unless expedited request. Custom draperies will arrive fan-folded, banded, covered in heavy duty bags and boxed for shipping. For installation, draperies will need to be professionally dressed and steamed to look their best. A professional drapery installer may be found in the yellow pages or on the internet.

Note: It is normal for p draperies to be banded by the installer to create even folds in the fabric. These bands may remain on the drapery for up to 3 days. This banding process will train the pleats to fold properly when the drapery is opened or closed.  On a 20" width panel there will be 5 pleats. If ordering loose rings for pleated draperies, add one extra ring to account for the lead pleat

Customization Options

• Lining Upgrades
•     -Dual Lining [available in white or ivory] a single layer of fabric of thicker fabric that is a combination between interlining and lining.
•     -Interlining - an optional third layer of fabric between face fabric and back lining. Used to add weight,fullness, hand-feel, opacity and insulation efficiency.
•     -Blackout Liners - Specific term denoting a lining that blocks of >99% light.
• Decorative Trim May be added to either or both sides of the drape.
• Edge banding with contrasting fabric is an available upgrade upon request.
• Duo-drape - seaming two complementary fabrics with a horizontal seam is an available upgrade upon request.
• Tie Backs can be added to give your drapery the pulled back, off the window look.
•     -Tie-backs are 4” tall and long enough to pull back the treatment half the width of the drapery panel. They are flat, fabric wrapped buckram.

Measuring Suggestions:

Outside Mount - Outside mounted treatments will be made to the exact dimensions provided.

Width: Measure the exact width of the window, including any frame. Add a minimum of 4” to each side (8” total overlap) to ensure light control and privacy.
Height: Measure the height of the window from the top edge of the molding to the bottom edge of the molding, sill or floor. Add a minimum of 4” to allow for an adequate mounting area above the window.

Note on Returns - The standard return size for draperies is 3-1/2” for pleated styles and 4” for Side Panels.

Inside Mount - Provide the exact sizes of the opening. The workroom will make all necessary deductions for a perfect fit.

Width: Measure inside the window casing at the top, middle and bottom. Record the narrowest measurement. No deduction will be taken on width.
Height: Measure inside the window casing at the left, center and right. Record the shortest measurement. B&W’s workroom will take a 3/4” deduction on the height