Rod Pocket Custom Drapery Panel in Group 1 Fabrics $ : Single Width Size

Rod Pocket Custom Drapery Panel-Single Width
You Choose the length

Group 1 Custom Fabric Swatches - Click here to view all Group 1 HS Custom Swatches

Decorative Trim - Click here to view all available decorative trim options

Custom Window Treatment Information:

Production Time: 10 - 12 business days
Delivery Time via UPS: 3-5 Standard Days, unless expedited request. Custom draperies will arrive fan-folded, banded, covered in heavy duty bags and boxed for shipping. For installation, draperies will need to be professionally dressed and steamed to look their best. A professional drapery installer may be found in the yellow pages or on the internet.

Note: It is normal for pleated draperies to be banded by the installer to create even folds in the fabric. These bands may remain on the drapery for up to 3 days. This banding process will train the pleats to fold properly when the drapery is opened or closed.  On a 20" width panel there will be 5 pleats. If ordering loose rings for pleated draperies, add one extra ring to account for the lead pleat

Customization Options

Privacy or Blackout Liners may be upgraded to increase your privacy while reducing or eliminating light.
Tie Backs can be added to give your drapery the pulled back, off the window look. Tie-backs are 4” tall and long enough to pull back the treatment half the width of the drapery panel. They are flat, fabric wrapped buckram.

Measuring Suggestions:

Outside Mount - Outside mounted treatments will be made to the exact dimensions provided.

Width: Measure the exact width of the window, including any frame. Add a minimum of 4” to each side (8” total overlap) to ensure light control and privacy.

Height: Measure the height of the window from the top edge of the molding to the bottom edge of the molding, sill or floor. Add a minimum of 4” to allow for an adequate mounting area above the window.

Note on Returns - The standard return size for draperies is 3-1/2” for pleated styles and 4” for Side Panels.

Inside Mount - Provide the exact sizes of the opening. The workroom will make all necessary deductions for a perfect fit.

Width: Measure inside the window casing at the top, middle and bottom. Record the narrowest measurement. No deduction will be taken on width.

Height: Measure inside the window casing at the left, center and right. Record the shortest measurement. B&W’s workroom will take a 3/4” deduction on the height

Pin Settings

The standard pin setting is 1-3/4” down from the top of the drapery. Other pin settings are available upon request at no charge. The pin setting for an under treatment is 1-1/2”. When ordering a drapery with a Decorative Traverse Rod the pin setting is 1/8”.

It is recommended Decorative Traverse Rods, Draperies & Side Panels be vacuumed periodically with a brush or drapery hose attachment. Professional cleaning is recommended for all Custom Drapery Panels. A professional drapery cleaner may be found in the yellow pages or on the internet.

Available Pleated Drapery Styles

There are four styles of pleated draperies available:

a. Pinch Pleat    b. Crown Pleat     c. Goblet Pleat    d. Inverted Pleat