Back Tabs Curtain Drapery Panel in Group 1 $ Fabrics - Wide Width Size

Custom back tab Drapery Panels in Group 1 Fabrics

View Larger Image

List Price: $325.00

Our Price: Starting at $229.99 | Price increases with length

Personalization

* denotes required field

Group 1 Available Fabrics*

Length*

Lining Upgrade*

Tie Backs

Add Tie Backs (+ $39.99)

Select Tab Length*

Quantity:

Email this page to a friend

Group 1 Custom Fabrics - Click here to view all Group 1 HS Custom Fabrics

Edge Banding and Decorative Trim

Custom Back Tab Curtains
Double Width - You Choose the Length - HS Group 1 Fabrics

Custom Back Tab Curtains - Single Width Curtains perfect for standard windows. Each Back Tab panel is sewn with two widths of fabric. (Typical fabric width is 50-55 inches.) Back Tab draperies are clean, simple panels with fabric tabs sewn on the rear of the panel. Rods are threaded through the tabs (tabs can be crafted to fit any rod size) creating neat even folds in the drape.
Panels are sewn with 2 x Fullness (panels will be ~80" wide when pulled flat | Two panels work well for window opening between 40-80 inches.

Pole Type	Tab Length	Approx Take Up
3/4" Pole	4-1/2"	1/2" take up
1" Pole	4-1/2"	3/4" take up
1-3/8" Pole	4-1/2"	1" take up
2" Pole	4-1/2"	1-1/2" take up
3" Pole	4-1/2"	2" take up

Custom Window Treatment Information:

Production Time: 10 - 12 business days
Delivery Time via UPS: 3-5 Standard Days, unless expedited request. Custom draperies will arrive fan-folded, banded, covered in heavy duty bags and boxed for shipping. For installation, draperies will need to be professionally dressed and steamed to look their best. A professional drapery installer may be found in the yellow pages or on the internet.

Note: It is normal for p draperies to be banded by the installer to create even folds in the fabric. These bands may remain on the drapery for up to 3 days. This banding process will train the pleats to fold properly when the drapery is opened or closed. On a 20" width panel there will be 5 pleats. If ordering loose rings for pleated draperies, add one extra ring to account for the lead pleat

Customization Options

Lining Upgrades
-Dual Lining [available in white or ivory] a single layer of fabric of thicker fabric that is a combination between interlining and lining.
-Interlining - an optional third layer of fabric between face fabric and back lining. Used to add weight,fullness, hand-feel, opacity and insulation efficiency.
-Blackout Liners - Specific term denoting a lining that blocks of >99% light.
Decorative Trim May be added to either or both sides of the drape.
Edge banding with contrasting fabric is an available upgrade upon request.
Duo-drape - seaming two complementary fabrics with a horizontal seam is an available upgrade upon request.
Tie Backs can be added to give your drapery the pulled back, off the window look.
-Tie-backs are 4” tall and long enough to pull back the treatment half the width of the drapery panel. They are flat, fabric wrapped buckram.

Measuring Suggestions:

Outside Mount - Outside mounted treatments will be made to the exact dimensions provided.

Width: Measure the exact width of the window, including any frame. Add a minimum of 4” to each side (8” total overlap) to ensure light control and privacy.
Height: Measure the height of the window from the top edge of the molding to the bottom edge of the molding, sill or floor. Add a minimum of 4” to allow for an adequate mounting area above the window.

Note on Returns - The standard return size for draperies is 3-1/2” for pleated styles and 4” for Side Panels.

Inside Mount - Provide the exact sizes of the opening. The workroom will make all necessary deductions for a perfect fit.

Width: Measure inside the window casing at the top, middle and bottom. Record the narrowest measurement. No deduction will be taken on width.
Height: Measure inside the window casing at the left, center and right. Record the shortest measurement. B&W’s workroom will take a 3/4” deduction on the height