Flat Style Custom Drapery Panel in C.O.M. $ Single Width Size

Custom Window Treatment Information:
Production Time: 10 - 12 business days
Delivery Time via UPS: 3-5 Standard Days, unless expedited request. Draperies will arrive fan-folded, banded, covered in heavy duty bags and boxed for shipping. For installation, draperies will need to be professionally dressed and steamed to look their best. A professional drapery installer may be found in the yellow pages or on the internet.

Note: It is normal for certain draperies to be banded by the installer to create even folds in the fabric. These bands may remain on the drapery for up to 3 days. This banding process will train the pleats to fold properly when the drapery is opened or closed.

Customization Options:

• Privacy Lining upgrade increases your privacy and eliminates a bit more light
  
• Blackout Lining upgrade may be chosen to greatly reduce or eliminate light.
• Tie Backs can be added to give your drapery the pulled back, off the window look. Tie-backs are 4” tall and long enough to pull back the treatment half the width of the drapery panel. They are flat, fabric wrapped buckram.

Measuring Suggestions:

Outside Mount - Outside mounted treatments will be made to the exact dimensions provided.

Width: Measure the exact width of the window, including any frame. Add a minimum of 4” to each side (8” total overlap) to ensure light control and privacy.

Height: Measure the height of the window from the top edge of the molding to the bottom edge of the molding, sill or floor. Add a minimum of 4” to allow for an adequate mounting area above the window.

Inside Mount - Provide the exact sizes of the opening. The workroom will make all necessary deductions for a perfect fit.

Width: Measure inside the window casing at the top, middle and bottom. Record the narrowest measurement. No deduction will be taken on width.

Height: Measure inside the window casing at the left, center and right. Record the shortest measurement. B&W’s workroom will take a 3/4” deduction on the height.

Number of Rings Needed

  Width             Rings

  20"                   8

  40"                  16

  60"                  24

  80"                  32

100"                  40

120"                  48

140"                  56

160"                  64

180"                  72

*Note that using an even number of rings ensures that both the first and last pleats face correctly

Care and Maintenance
It is recommended Decorative Traverse Rods, Draperies & Side Panels be vacuumed periodically with a brush or drapery hose attachment. Professional cleaning is recommended for all Custom Drapery Panels. A professional drapery cleaner may be found in the yellow pages or on the internet